Optical Media Converter Fast 10/100M Bidi RJ45 SC 20Km Fiber Optic Media Converter

Description

10/100M adaptive fast Ethernet optical media converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX and 100 Base-Fx network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users’ needs, achieving high-speed remote interconnection for up to 120 km's relay-free computer data network. We can offer dual fiber multi-mode as well single fiber single-mode.

Media converters can be used anywhere in the network to integrate newer technology with existing equipment to support new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media converters can extend the productive life of the existing cabling as well as the active equipment.

Technical Parameters

Technical Parameters for 10/100M Adaptive Fast Ethernet Optical Media Converter
Number of Network Ports			1 channel
Number of Optical Ports			1 channel
NIC Transmission Rate			10/100 Mbit/s
NIC Transmission Mode			10/100M adaptive with support for automatic inversion of MDI/MDIX
Optical Port Transmission Rate			100Mbit/s
Operating Voltage			AC 220V or DC +5V
Overall Power			<1W
Network Ports			RJ45 port
Optical Specifications			Optical Port: SCMulti-Mode: 50/125, 62.5/125um Single-Mode: 8.3/125, 8.7/125um, 8/125,10/125um
Data Channel			IEEE802.3x and collision base backpressure supportedWorking Mode: Full/half duplex supported Transmission Rate: 100Mbit/swith error rate of zero
Desk Type Dual-Optical Single-Mode/Multi-Mode Media Converter
P/N		Wavelength (nm)		Optical Port	Electric Port		Optical Power (dBm)	Receiving Sensitivity (dBm)		Transmission Range (km)
1		850		SC	RJ-45		-8~ -3	≤-19		0.55
2		1,310		SC	RJ-45		-20~ -15	≤-34		2
3		1,550		SC	RJ-45		-15~ -8	≤-34		10
4		1,310		SC	RJ-45		-15~ -3	≤-34		20
5		1,310		SC	RJ-45		-8~ -3	≤-34		40
6		1,310		SC	RJ-45		-5~0	≤-34		60
7		1,550		SC	RJ-45		-5~0	≤-34		80
8		1,550		SC	RJ-45		-3~3	≤-36		100
9		1,550		SC	RJ-45		0~5	≤-36		120

Feature

1. Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.

2. The UTP port supports the connection of MDI/MDI-X auto crossover.

3. Singlemode Fiber: the max distance up to 60km

4. Supporting the max 1536 byte Ethernet packet

5. Supporting flow control

6. Adopting internal power supply

Specificaion

1. Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX

2. Ambient temperature: 0 ~ +50°C Storage temperature: -20 ~ +70°C Humidity: 5% ~ 90%

3. Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: SC,1000Mbps

4. Cable : UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber : singlemode : 8.3/125, 8.7/125, 9/125μm (distance 20-100km)

5. Flow control: Full Duplex: IEEE802.3x Half Duplex: back pressure

6. Power: DC 48V to DC 5V
7. MAC address table: 4K

8. Data Buffer: 256K

Installation:

Attach fiber cable from the converter to the fiber network. The fiber connections must be matched – transmit socket to receive socket.

Attach a UTP cable from the 1000BASE-T network to the RJ-45 port on the converter.

Connect the power adapter to the converter and check that the Power LED lights up. The TP-Link and RX LEDs will light up when all the cable connections are satisfactory.

Product Pictures

Factory Image